Metal-clad Cable Certified for Canada Type AC90
Metal-clad Cable Certified for Canada Type AC90
Product Details
Application
For open and concealed wiring in dry locations only.For use in cable troughs and ventilated flexible cable ways in dry locations only. Minimum recommended installation temperature minus 40°C (with suitable handling procedures).Maximum conductor temperature 90°C. Approved for use with ceiling fixtures.
Standards:
UL Standard C22.2 No. 131, No.38 and No.2256, RoHS Flame test.
UL FT4 Hazardous Location, SUN RES (outer jacket) SUN RES on inner jacket and insulated conductor available upon request, Direct Burial.
UL FT4 Hazardous Location, SUN RES (outer jacket) SUN RES on inner jacket and insulated conductor available upon request, Direct Burial.
Technical Data
Temperature：-40°C to +90°C
Approvals：CSA Spec C22.2 No. 51.
Rated： 600 volts.
Approvals：CSA Spec C22.2 No. 51.
Rated： 600 volts.
Specifications
ROHS
Low Voltage
Working Temperature 90℃
Cold Resistant -40℃
Flame Retardant
construction
Solid Two, three or four copper conductors with low temperature XLPE insulation (RW90 XLPE) and bare copper bonding wire. Conductor assembly PP tape wrapped and covered with bare interlocked steel tape armor.
- DEXIN CABLE
- UL CABLE
- UL 4703 Solar PV Cable
- Hook Up Wire - UL1015
- Teck 90 Cable
- Copper RW90 600V XLPE Insulation Cable
- SOOW Portable Power Cable
- Type THHN/THWN/T90 Wire
- Type AC(BX) Steel Armored Cable
- Nonmetallic-Sheathed Cable Type NM-B
- MC Cable With THHN Ground
- Nonmetallic-Sheathed Cable Certified for Canada Type NMD90
- Metal-clad Cable Certified for Canada Type AC90
- TC Tray Cable FR-XLPE/PVC
- SDW Cable
- Welding Cable 105°C 600V
- DLO Cable or Diesel Locomotive Cable
